rc3Dprint MICRO PEREGRINE FLYING WING, Инструкция

Страница: 2 / 22

T H A N K Y O U
Thank you for downloading this Micro Peregrine flying wing. These models take many hours
of work to make available to you so please don’t share the STL files with others. Send them
to www.rc3print.com where they can download the models themselves. This enables me to
continue to develop new models to make them available for download.
This document aims to help you print and assemble your aircraft. Our designs are made to
be simple, this model is designed explicitly with LW-PLA in mind, so it incorporates carbon
tube spars. If you print it from regular PLA it will obviously be heavier and you should take
this into account.
3D printers often have many di ff erences so you may need to tweak settings to get the best
results.
Included in the document you will find Cura profiles and layouts for each part and assembly
instructions. Most of the components in the design are
solid bodies , this has some advantages
over hollow bodies in that you can adjust some settings such as wall thickness, infill
percentage, etc. As such we recommend using Cura to slice the files though it is not
required for this model. The walls of these solid bodies are single line 0.4mm thickness to
reduce weight. As you are printing and assembling the model yourself we take no liability
for damage or loss resulting from your use of these files. Please fly responsibly and follow all
local laws.
Share your results on Instagram, Facebook, or by email and tag @rc3dprint for discount
codes on future orders.