Installation of Protective Nose Guard
Operating Instructions
Nose guard can prevent damage to the bow due to collision.
3.To remove, unclip and slide cone off
1.Slide cone onto bow (as shown)
2.Click into place
Pull trigger toward body of controller, this will make the boat move forward.
Push trigger away from body of the controller, this will make the boat move backwards.
Reverse
Forward
4. Maximum control range is 150meters, going beyond this may cause this
boat to lose control.
5. Whenever you are not using your model turn off the controller and unplug
the rechargeable battery from the boat.
6. This model is equipped with a low-voltage cut-off, your speed will decrease
significantly when the battery is low. At this time bring your model to shore.
7. Always be safety-conscious. If your model gets out of control, retrieve it
safely. Always play safe.
