In the case where your boat is upside-down, just push
and pull on the trigger, and the boat will automatically right itself.
1. Keep body of boat clean and store out of direct sunlight.
2. After use, clean model and use a soft cloth to absorb any water that has accumulated.
3. Always remove batteries from both the boat and the controller when not in use.
4. Occasionally apply provided lubricant to the boats drive shaft connection in order to
keep it turning smoothly.
This model is equipped with a low-voltage cut-off. The boat’s speed will decrease
significantly when the battery is running low. At this time bring your model to shore
and recharge/replace to a full battery.
Self-Righting
Fine adjustment toward left
Fine adjustment toward right
Maintenance And Inspection
Low-Voltage Cut Off Feature
If your model is automatically turning left, slowly rotate
the Directional fine adjustment knob clockwise (as shown),
this will correct the drift and allow the boat to move forward accurately.
If your model is automatically turning right, slowly rotate
the Directional fine adjustment knob counter-clockwise (as shown),
this will correct the drift and allow the boat to move forward accurately.
