These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect
the current technical specifications at time of print.
© 2016 by CEI Conrad Electronic International (HK) Limited
89141RC_v1_0316_02_m_en_(3)
Navigation
Button
Function
+
(4) Increase volume
Increase value
–
(3) Decrease volume
Decrease value
OK
(8) Select menu item
MENU
(7) Enter menu
Go up
Exit to save
MODE
(6) Switch between modes
Flip through menu items/settings
Important general settings
PIP function (Picture in Picture):
>
To enable PIP, select
Menu > General settings > PIP
and switch it to
ON
.
>
The secondary image can be made smaller or larger by selecting size. Cycle through the three sizes
of 420 x 240, 266 x 160 and 133 x 80 using the
–
and
+
buttons.
>
The second image can be moved by selecting position. Toggle between the eight positions by using
the
–
and
+
buttons.
>
Long hold the
OK
button to activate and deactivate PIP on screen.
Volume:
>
Earphones can be connected to the earphone jack (16).
>
Use the
+
and
–
buttons to increase and decrease the volume.
>
When the goggles are powered off, the volume is automatically reset to 0.
Important system settings
Power:
>
Select the cell count corresponding to the number of cells of your external battery.
>
The battery charge condition is displayed on screen. When the ‘battery depleted’ symbol shows,
connect a fully charged battery.
Language:
>
Change menu language.
Display ratio:
>
Select the aspect ratio: 16:9 or 4:3
Menu show:
>
Choose to have the menu and OSD information appear on screen permanently or disappear after a
set time, or configure the transparency of the overlay.
>
Settings for menu and OSD information are independently configurable.
Reset menu:
>
Return goggles to factory default settings.
When using the PIP function or HDMI input the unit operates as a higher temperature
and the built-in cooling fan will turn on.
Do not cover the exhaust and keep it clean at all times.
PAIRING
The pairing of goggles and video transmitter happens in two steps:
1.
Select the RF band in the general settings corresponding to the RF band of the video transmitter.
2. Select the PPM channel in the system settings corresponding to the PPM channel of the video
transmitter (You can assign switch positions for activating/deactivating PIP or the front facing
camera).
Notes:
>
Select a channel with little interference. When the transmitter is turned off, check each channel for
interference and look for a consistent background. In case of interference, horizontal lines appear.
>
Through the radio controller, you can open the Picture-in-picture function or close it. Also, you
can change the Picture-in-picture image size by connecting the transmitter to the
PPM IN
socket.
BEFORE FLYING
>
Perform a range test. Other electronic devices and the surroundings can affect the range.
>
The video signal is affected by obstacles (e.g. human bodies, concrete walls, houses etc.).
Maximum range can only be achieved in a clear line of sight.
>
It takes some time to adapt to FPV flying. Practice in a familiar setting until you feel comfortable.
CLEANING AND CARE
>
The goggles do not require any maintenance, do not disassemble them. Maintenance or repairs
may be carried out by a professional only.
>
Do not let liquid enter the goggles.
>
Clean the exterior of the goggles using a clean, soft, dry cloth only.
>
Do not use any aggressive cleaning agents or chemical solutions as these may damage the
housing causing discoloration and/or malfunction.
>
Keep the goggles in the protective case when not in use.
PRODUCT SUPPORT
Visit http://www.rclogger.com/support or call +852 2559 2662 for product support. Additionally visit our
Online Ticket System at http://support.rclogger.com
for any RC Logger inquiry.
DISPOSAL
In order to preserve, protect and improve the quality of environment, protect human health
and utilise natural resources prudently and rationally, the user should return unserviceable
product to relevant facilities in accordance with statutory regulations. The crossed-out
wheeled bin indicates the product needs to be disposed separately and not as municipal
waste.
Consequently you comply with your legal obligations and contribute to environmental protection!
FCC COMPLIANCE STATEMENT
Grantee Code: 2ACIM
Product Code: -SPX01
FCC IDENTIFIER: 2ACIM-SPX01
Statement according to FCC part 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
>
This device may not cause harmful interference, and
>
This device must accept any interference received, including interference that may cause undesired
operation.
Statement according to FCC part 15.21
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
TECHNICAL DATA
Battery pack:
Base ....................................................... Input: 12 – 16 V/DC
Output: 9.6 – 12.6 V/DC
Battery .................................................... Type: LiPo, 3 cells
Input: 10 – 28 V/DC, 2 A
Output: 11.1 V, 1000 mAh
Power adapter:
Input........................................................110 – 240 V/AC, 50/60 Hz, max. 0.7 A
Output .....................................................12 V/DC, 2 A
Goggles:
Power supply ..........................................7 – 28 V/DC, 1 A
Power consumption ................................
6.8 W / 12 V/DC
Display .................................................... FOV: 30° (diagonal)
Resolution: 854 x 480 (WVGA)
Interpupillary distance .............................59.5 – 69.5 mm (adjustable)
Luminance ..............................................350 cd/m
2
Wireless receiver
.................................... Antenna port: 2x SMA, 50 Ohm
TV System: NTSC/PAL
Video output level: 1.0Vp-p Typ, 75 Ohm
Audio output level: 1.0Vp-p Typ, 10 kOhm
AV interface ............................................ø3.5 mm jack, video input, stereo audion input
HDMI interface ........................................ C-Type connector
HDMI 1.3 Digital input, HDMI Audio in
Resolutions: 1920 x 1080p50, 1920 x 1080p60, 1920 x
1080i50, 1920 x 1080i60, 1280 x 720p50, 1280 x 720p60,
720 x 576p50, 720 x 480p60, 720 x 576i50, 720 x 480i60
DIV AV interface .....................................Diversity receiving, video/audio output
Ear out interface .....................................
ø3.5 mm jack, Stereo 16 Ω / 150 mW
PPM IN interface ....................................ø3.5 mm jack, supports 8 channel PPM IN
Front camera .......................................... FOV: 100° (diagonal)
Resolution: 640 x 480 (VGA)
Operating temperature ...........................+10 to +65 °C (+50 to +149 °F)
Dimensions .............................................169 x 70 x 42 mm
Weight
....................................................approx. 182 g
Frequencies:
Band
Frequency in MHz
CH1
CH2
CH3
CH4
CH5
CH6
CH7
A
5865
5845
5825
5805
5785
5765
5745
B
5733
5752
5771
5790
5809
5828
5847
F
5740
5760
5780
5800
5820
5840
5860
