14
.1) When adjusting CG position, remember to put everything that will be in flight on the plane.
.2) The recommended starting CG position is 110 mm from the leading edge of the wing.
.3) You can alter the CG position by altering the battery size and the battery position.
.4) Find the optimal CG position to suit your flying style through flying the plane.
General caveats:
1
）
The plane is constructed with EPP, EPS, light plywood, and carbon fiber materials. It is stronger and
easier to repair than traditional balsa planes. However, the plane is not indestructible and still needs to
be handled with care.
2
）
There is an EPS core under the EPP material in many parts of the plane. Please prevent regular CA from
running to the core during build or repair.
3
）
EPP planes are susceptible to high temperature. Do not leave them for a long time in a hot environment
such as the interior of a car exposed to direct sunlight during summer time.
4
）
The best way to store EPP planes is to hang them vertically to avoid possible deformation.
The two recommended power set-ups:
(Standard set-up)
1) a 2820 or a 3542 sized outrunner brushless motor with a KV value between 850 and 940
2) a 40A speed control for model planes
3) four 14g metal gear servos
4) a 3s 2200mAh 25-30C lipo pack
5) a 13*6.5 APC prop or a 13*7 EP wood prop
(High power set-up)
1) a 2826 or a 3548 outrunner brushless motor with a KV value between 740 and 790
2) a 60A speed control for model planes
3) four 14g metal gear servos
4) a 4S 1600mAh 30C lipo pack
5) a 14*7 APC prop or a 14*7 EP wood prop
Transmitter set-ups for all the control surfaces:
Low rates: 60%
EXP 30%
High rates: 100%
EXP 30%
