RC Groups QC450-I ARF, Руководство пользователя

Страница: 17 / 59


W i t h a defect or a malfunctioning first the cause of the disturbance is to be eliminated, before you start your
Model again.

Do not expose your Model and the remote control plant over longer time to the direct sun exposure or
la r g e
heat.

W i t h a heavy crash (for example f r o m
la r g e
height) the electronic Gyro sensors can be damaged and/or detuned.
Before a renewed flight fr om there absolutely the vole function is to be examined!

W i t h a crash t h e g a s is to be reduced immediately t o nul. Turning rotors can b e d a m a g e d with contact with
obstacles and/or with the impact. Before a renewed flight these are to be examined absolu tely for eventuele tears
or Bruchstelen!

In order to avoid damage to the Quadrocopter by crash because of undervoltage and/or to the accumulator by
over-discharging, we recommend, to absolutely consider in the flight the flare signals for undervoltage. Since
the inserted LEDs radiate only in a direction, we recommend the additional installation of the LiPo LiPo -Saver
stock No. 230327. The Lipo Lipo -Saver indicates by light signal a threatening undervoltage to you. Place the LiPo
LiPo-Saver at
su it a b le
Stele in the Quadrocopter.

Due to the natural heating up of the engines and the electronics construction units we recommend not to exceed a
flying time of max. 20 min. Afterwards yo u should l e a v e the Model sufficiently to cooling, in order to avoid
eventuele damage by overheating!
4 . A f t e r t h e e n t e r p r i s e

Clean the Quadrocopter of contamination (grass etc.) and examine you the rotors for tightness as well as a n y
damages through crashes.

Always separate the accumulator from electronics by marking the plug out. E v e n t u e l flowing rivers can destroy
otherwise the accumulator over -discharged and in such a way!