•
Glue the motor mount stick to the front bottom of the wing and tape the wing spar to the leading
edge of the wing using a tape. (Fig. 5)
•
Glue the two fuselage halves together with Foam-Tac. Use the glue sparingly, just a few dots,
and let the solvent evaporate sufficiently. Cut and/or sand the fuselage to shape.
•
Cut out the hole for the aileron servo in the wing about 3" from the leading edge. Insert the
servo into the hole.
•
Make two slits next to leading edge of the wing for the battery mount strap. Insert the strap into
the slits and around the motor mount stick (Fig. 6).
Fig. 5: Glued and taped motor mount and wing spar
Fig. 4: Preparing wing leading edge
