Figure 29: Thermal assistant page.
FenixS– user’s manual
Document Revision: 1.0
September 2021
4 Additional FenixS advance version pages
The following pages in the next sub-paragraphs are only valid for
advance
version of the FenixS.
4.1 Thermal assistant page
While thermaling, all thermal information can be vied on
Thermal assistant page
. Designed to
provide best user interface displaying all essential thermal information to the pilot. The
displayed
Thermal assistant page
will show following information on main screen:
GAIN –
will display accumulated/lost altitude from the very start of circling.
ALT –
will display current altitude of the glider.
Wind indicator –
will display wind speed and direction.
Thermal assistant page
contains following layout. On the middle of the screen, graphical and
numerical wind indicators can be seen inside thermal assistant.
Main purpose of displaying thermal assistant circuit, is to show the pilot a map of the thermal
strength in the last full circuit. This will present approximated location of the currently best-
known thermal strength.
31
