Deploy
Locate two release tabs on the
opposite sides of the battery end-cap.
Push at the tabs from the top to
release the end-cap handles.
Move the handles up from both sides.
2.2. Lithium batteries:
2. Install new batteries
2.1. Alkaline or nickel metal hydride
batteries:
1.2. If you are using the model with
low-profile
handles:
1. Open the RBRfermata
1.1. If you are using the model with
quick-release
handles:
Firmly grip both battery end-cap handles and pull them up to remove the battery
carrousel.
Firmly grip both battery end-cap
handles and pull them up to remove
the battery carrousel.
Alkaline and nickel metal hydride are
magnetic and hold in place with no
additional steps required. Simply put
the batteries in the carrousel, ensuring
correct polarity.
Lithium batteries do not have
enough magnetic material to hold
them together in assembly.
Use the red retention bands
provided with your RBR
fermata
,
as shown. Verify polarity before
installing the batteries.
3. Close the RBRfermata
3.1. If you are using the model with
quick-release
handles:
Align the battery end-cap with the slots
on the housing and gently push down to
ensure it fits in place.
2
3