ecom-JN
Page 14
Text input lines 1 and 2
In certain cases it can be useful to include additional comments in the
report (notes, comments, observations, etc.). This can be achieved by
selecting
“Text input”
with the cursor and pressing
<E>
:
Two lines each 20 characters in length are available for inputting any
information required. An external keyboard is available as part of the
data processing package, without this keyboard only numeric data can
be entered using the internal keyboard.
Whilst the report is being collated and printed, all other functions are
inoperative.
Note:
The memory contents can be deleted by pressing
<m>
in the
appropriate mode (BImSchV measurement, CO measurement or draft
measurement). The
"m"
in the display disappears and the values in
the memory are deleted without being over written with by any current
results. To store the current values , the
<m>
key must be pressed
again and the
"m"
appears in the top right hand corner of the display
again.
Insert text
•
•
Cancel with <ESC> ! delete with <F2> !
