RBR#0014393revA
Ruskin Mobile
9
•
•
•
Status
The top of screen shows the name and serial number of the instrument, followed by its status:
Number of samples taken
Logging state (
ON
or
OFF
)
Sampling rate
When the logging state is shown as
ON
, the instrument is
logging data.
When the logging state is shown as
OFF
, the deployment is
paused but still in progress.
A deployment can have only one sampling rate, thus you cannot change it when logging is just paused.
To adjust the sampling rate, you have to stop the deployment using the red
STOP
button. A message "Deployment
stopped" will be displayed, and the sampling rate field will become editable. However, you cannot resume the same
deployment after stopping it. After changing the sampling rate, you will have to start a new deployment.
.
.
Once a deployment has been stopped, it cannot be resumed.