Page
4
of
7 7/6/18 REV1 (DP)
STEP 16- Install all (36) Decorative 8mm x 16mm Button Head Bolts and 8mm Flange Nuts at
this time if desired, (Figure 18).
13000 TEMPLE AVE, CITY OF INDUSTRY, CA. 91746, 877-519-9090
(Fig 1) Attach Side Panel to Rear
Panel (Driver/left side illustrated)
Front
(Fig 2) Cross Brace installed
(Fig 3) Attach Bracket with Seal to
lower mounting slots in Side Panel
Rear
Rear
Foam Seal
(2) 12mm x 30mm Hex Bolts
(4) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
(2) 8mm Combo Bolts
(2) 8mm x 70mm Hex Bolts
(4) 8mm x 16mm Small Flat Washers
(2) 8mm Lock Washers
(2) 8mm Hex Nuts
(Fig 4) Apply removable tape (masking tape for
example) to all mounting locations to prevent
damage to the finish (11-16 model pictured)
Attach Rubber Seal to bottom
of Bracket assembly