UNC100 Axiom Hardware Manual V1.1
RBH Access Technologies Inc.
Page
17
of
25
NRC2000 panels may be used in place of RC-2 panels.
NURC2000 may also be used in place of RC-2 panels.
The D-NET connects IOC-16, RC-2, SafeSuite™ panels, PC-100, NRC2000, and NURC2000 devices in a daisy
chain fashion (parallel connection) to the network controller. Device controllers do not have to be
addressed sequentially. However, using sequential device controller addressing is recommended as this
makes your cabling diagrams easier to follow and simplifies troubleshooting as the devices are in the
correct numerical sequence.
*** UNC100 D-NETs comprising SafeSuite™ panels, PC-100, NIRC2000, and NURC2000 devices must
have the last unit in the line terminated.
Device Controller Address Assignment
Address
Device Controller
1 – 4 *
RC-2, NRC2000, NURC2000
5 – 20
IOC-16, PC-100
1-255
SafeSuite™ panel
* The first RC2 is on the NC100 – Therefore, the first physical RC2 to be connected will start at address 2.
