RBH Sound Signature SX Series, Руководство пользователя

Страница: 6 / 28

Room Setup Suggestions
(continued)
IMPORTANT NOTICE REGARDING BASS MANAGEMENT:
It is important the signal
being sent to the subwoofer be a non-boosted or “flat” signal. To be sure of this,
check the settings on your receiver or processor to make sure any “bass boost”,
“super bass” or “loudness” is set to Off. In most cases a home theater receiver or
processor will determine the crossover frequency through bass management settings.
In this configuration, connect the receiver or processor to the Line Level Input
of the powered subwoofer. Also, if your home theater receiver or processor’s bass
management provides the subwoofer with a low-pass audio signal (lowest bass) only,
please use the LFE line level input of the subwoofer or make sure the subwoofer’s
crossover is set to the Off or Defeat position. Your subwoofer will now reproduce
the bass frequencies the way they were originally recorded. Use the subwoofer level
control and the individual bass management control within the receiver or processor
to adjust the subwoofers’ volume if necessary. Once set, the volume controls should
not need to be altered as the subwoofers’ volume will track with the master volume
control of your receiver or processor.
Signature SX Series 4 Owner’s Manual
NOTE: There are several different surround formats available. Dolby Pro-Logic, Pro-Logic II, Dolby Digital and DTS generally
have a 5 speaker plus subwoofer requirement. Dolby Digital EX and DTS ES add a center rear speaker. Dolby TrueHD and DTS
Master Audio available only on Blu-ray disc, generally have a 7.1 requirement. Please consult your audio/video professional
to determine which system is best for you and how many speakers you will require.