RBC Bioscience MagCore Plus II, Руководство по обслуживанию

Страница: 54 / 80

━ Replace the timing belt of the lift motor of the base
1. Remove the four screws on the
magnetic module and take out the
module.
2. Unplug the power connector of the lift
motor.
3. Remove the two screws of the reinforced
metal sheet of the motor.
4. Remove the two screws of the bearing at
the lateral grooves.
5. Remove the two fixation screws of the
bearing fixation base and move the drive
module upward.
6. Replace a new timing belt.