INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY | MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia
1300 788 778 www.rba.com.au |
New Zealand
0800 722 111 www.rbagroup.co.nz
2 of 4
You are responsible for the safe operation of this unit.
Attention
For optimum installation, use at least 3 suitable screws for each wall plate. Screws should be selected to suit the wall type. Grab Rails are
no stronger than the anchors or walls to which they are attached, and therefore, must be firmly secured in order to support the loads for
which they are intended.
Maintenance and Cleaning Instructions
Do not use detergents containing bleach, acids, alkalis, or chlorine or abrasive products. Do not use abrasive objects (e.g. scouring pads).
Do not use chemicals that can damage plastic. Clean the surface with water and a neutral detergent; rinse carefully and dry with a clean
cloth. If alternative cleaning methods and/or chemicals are used, warranty may become void.
Important Warnings
Exceeding the maximum load values may cause permanent product damage. If this happens, cease use until checked by a specialised
maintenance person. Improper use, such as for gymnastic exercises or as a step, may cause accidents with serious consequences. Reliable
operation and product safety depend on the way the products are installed and used.
Ensure installation is performed by qualified personnel. Incorrect installation can seriously compromise product functionality.
Tools Required
•
Plumbers Tape
•
Screw Driver
•
Extended Driver Bit
•
Spirit Level
Components Supplied
2x Flange Cover
2x Bracket Post
2x Bolt
6x Screw
6x Pin
1x Rail
2x Wall Plate
2x Flange Button
