INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY
|
MELBOURNE
|
BRISBANE
|
PERTH
|
AUCKLAND
Australia
1300 788 778 www.rba.com.au
|
New Zealand
0800 722 111 www.rbagroup.co.nz
2
Technical Data
Inlet 1/2” BSP (G1/2”)
Operating pressure 200 – 500 kPa
Flow Time 7 seconds nominal (ALFA & RIO) 15 seconds (GOOSENECK)
Maximum Temp. 55ºC
Flow Rate 4.5L per minute/5.5L per minute/8.5L per minute
Warranty 2 years
Dimensions
261m
m
75m
m
51m
m
Ø45m m
G1/2"
147m m
185m
m
22º
RBA1043 SERIES - ‘ALFA’
FIGURE 1
RBA1044 SERIES - ‘RIO’
Ø34,5m m
Ø44m m
G1/2 "
20º
110m
m
125m m
51m
m
110m m
52m
m
Ø44m m
129mm
101m m
G1/2 "
80,5mm
62mm
93
m
m
51
m
m
112m m
Ø34,5m m
20º
RBA1047 SERIES - ‘GOOSENECK’
52m m
58m m
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
SYDNEY
|
MELBOURNE
|
BRISBANE
|
PERTH
|
AUCKLAND
Australia
1300 788 778 www.rba.com.au
|
New Zealand
0800 722 111 www.rbagroup.co.nz
3
DESCRIPTION
Self closing pillar taps are designed for public areas, available in bright chrome
fi nish casted from dezincifi cation resistant brass alloy.
Single connection to water supply line, to either cold or pre-mixed water.
RBA 1043-600 ‘Alfa’ Basin Pillar Tap DR - Chrome - 6 Star WELS, 5.5Lpm
RBA 1043-400 ‘Alfa’ Basin Pillar Tap DR - Chrome - 4 Star WELS, 8.5Lpm
RBA 1044-600 ‘RIO’ Basin Pillar Tap DR - Chrome - 6 Star WELS, 4.5Lpm
RBA 1044-400 ‘RIO’ Basin Pillar Tap DR - Chrome - 4 Star WELS, 8.5Lpm
RBA 1047-600 ‘Gooseneck’ Basin Pillar Tap DR - Chrome - 6 Star WELS, 5.5Lpm
RBA 1047-400 ‘Gooseneck’ Basin Pillar Tap DR - Chrome - 4 Star WELS, 8.5Lpm
Installation
1) Installation must be carried out in accordance with local authority requirements.
2) Flush the line thoroughly, and remove all dirt and grit from the line before
connecting the tap.
3) Install the tap in the basin, tightening lightly with spanner or grips.
4) Connection may be made with either fl exible S/S braided hose, or copper tube
and compression fi ttings.
5) Before turning on the water remove the aerator and fl ush the tap.
6) Replace the aerator and check for leaks.
7) Fit appropriate coloured indicator to the handle.
PROBLEM
PROBABLE CAUSE
SOLUTION
TROUBLE SHOOTING
No fl ow or low volume
*To remove the aerator and cartridge, see “Spare Parts” to choose appropriate tool. (Not supplied with the product).
Water fl ows continuosly
or Short/ long fl ow time
Leak under knob
Water turned off
Water outlet blocked
Cartridge blocked with dirt
Cartridge damaged
Valve direction incorrect
Cartridge damaged
Turn on
Remove the blockage
Remove and clean*
Replace the cartridge*
Replace the cartridge*
