background image

20

WARRANTY / RETURNS / EXCHANGES

We understand that sometimes a product may need to be returned. If you have purchased from the RAZORWELD 

Authorised Dealer Network, to assist you in following the correct procedure enclosed is the returns policy.

Our Returns Policy includes the rights you have under the American consumer Law and other relevant laws.

. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably  

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of  

acceptable quality and the failure does not amount to a major failure.

• You shall inspect the Goods on delivery and shall within seven (7) days of delivery (time being of the essence) notify 

JASIC Technologies America Inc of any alleged defect, shortage in quantity, damage or failure to comply with the 

description or quote.

• You shall also afford JASIC Technologies America Inc the opportunity to inspect the Goods within a reasonable

time following delivery if you believe the Goods are defective in any way.

• If you shall fail to comply with these provisions the Goods shall be presumed to be free from any defect or damage. 

For defective Goods, Which JASIC Technologies America Inc has agreed in writing that you are entitled to reject,

JASIC Technologies America Inc ‘s liability is limited to, at the discretion of JASIC Technologies America Inc

either replacing the Goods or repairing the Goods except where you have acquired Goods as a consumer within the  

meaning of the relevant State legislation and trade act policies and is therefore also entitled to, at the consumer’s 

discretion either a refund of the purchase price of the Goods, or repair of the Goods, or replacement of the Goods.

Returns will only be accepted provided that:

(a) You have complied with the provisions outlined above, and

(b) where the Goods are unable to be repaired, the Goods are returned at your cost within thirty (30) days of the  

delivery date, and

(c) JASIC Technologies America inc will not be liable for Goods which have not been stored or used in a proper  

manner, and

(d) the Goods are returned in the condition in which they were delivered and with all packaging material, brochures 

and instruction material in as new condition as is reasonably possible in the circumstances.

• JASIC Technologies America Inc Accepts no responsibility for products lost, damaged or mislaid whilst in transit

• JASIC Technologies America Inc may (at their sole discretion) accept the return of Goods for credit but this may 

incur a handling fee of up to fifteen percent (15%) of the value of the returned Goods plus any freight costs.

• Where a failure does not amount to a major failure, JASIC Technologies America Inc is entitled to choose

between providing you with a repair, replacement or other suitable remedy.

PURCHASER’S REMEDIES :

 

WITH RESPECT TO ANY CLAIM ARISING OUT OF ANY ORDER, ANY GOODS DELIVERED PURSUANT TO ANY 

ORDER AND EXPRESSLY ACCEPTED IN SELLER’S ACKNOWLEDGMENT, OR SELLER’S PERFORMANCE IN  

CONNECTION WITH ANY ORDER, INCLUDING, WITHOUT LIMITATION, ANY CLAIM ARISING OUT OF ANY  

RECALL, DEFECT OR ALLEGED DEFECT IN ANY GOODS OR SERVICES FURNISHED BY SELLER, SHALL BE  

LIMITED EXCLUSIVELY TO THE RIGHT OF REPAIR OR REPLACEMENT OF SUCH GOODS OR SERVICES, AT  

SELLER’S OPTION. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE FOREGOING, IN NO EVENT 

SHALL SELLER BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT  

LIMITATION, ANY LOSS OF ANTICIPATED PROFITS INCURRED BY PURCHASER WITH RESPECT TO ANY GOODS 

OR SERVICES FURNISHED BY SELLER, OR ANY DAMAGES ARISING FROM INJURIES TO PERSONS AS A  

RESULT OF PURCHASER’S OR A THIRD PARTY’S NEGLIGENCE. SELLER’S WARRANTY DOES NOT COVER 

FAILURES RESULTING FROM THE IMPROPER INSTALLATION, MOUNTING DESIGN OR APPLICATION OR FROM 

CORROSION. THE PROVISIONS OF THIS PARAGRAPH ARE A MATERIAL TERM OF THIS TRANSACTION.

MAKING A CLAIM

If you wish to make a claim under this Warranty, you should:

•  Return the product to the point of purchase either in person or on a prepaid courier; or

•  Contact Us by Telephone on (+1) 253-859-6277, 253-859-6278 or e-mail [email protected]

• When returned, the product must be accompanied with the original invoice including the purchase price and  

disclosing the purchase date

• All costs of installation, cartage, freight, travelling expenses, hiring tools and insurance are paid by the Customer. 

• To the extent permitted by law, our total liability for loss or damage of every kind related to the product in any way 

whatsoever is limited to the amount paid to the retailer by you for the product or the value of the product.

No responsibility will be taken for products lost, damaged or mislaid whilst in transit.

Содержание JRWPC45LT

























Отзывы: