Razorgage Cyclone, Руководство по эксплуатации

Страница: 18 / 23

15
Saw operation
Before operating saw read all general and safety rules.
If operator is uncomfortable with any operation or condition of saw get help
from supervisor.
The Cyclone upcut saw is operated by the triggering of two hand anti tie down
triggers located on the work piece clamping handles at either side of the top
clamp blade cover. The operator’s hands must never be placed under the top
clamp. Maintain pressure on triggers until the top clamp opens completeing
the saw cycle.
The operator must thoroughly read and
understand this manual before operating the cut
off saw or starting any servicing. All safety and
warning instructions should be followed. This
manual must be available to all operators.
WARNING
Two hand trip
triggers, press at
same time to
cycle saw