Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00 AM - 5:00 PM PST.
2
Step 7
Step 3
Step 4
Figure 4
Using a 5 mm Allen wrench, loosen the two (2)
hex bolts on both sides of the battery bracket and
remove.
Step 5
Figure 5
Locate the white plastic connector on the battery
that attaches to the control module and disconnect
by depressing the tab on the connector.
Step 6
Figure 6
Using both hands, carefully remove the batteries.
Reverse steps 1 through 6 to install replacement batteries.
ATTENTION: Charge battery 12 hours before initial use.
Figure 3
Remove the battery cover by lifting up the right side
first then slide off. Be careful not to pull any of the
wires that are attached to the cover.
