Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Step 3
Step 4
Step 5
Step 6
Step 7
Slide the throttle out the handlebar and carefully pull
the wire.
Using a flathead screwdriver remove the plastic end cap
from the handle. Set end cap aside.
Using soapy water or some lubricant apply some drops
in between the handle and the grip and remove the grip.
Set grip aside.
Using a 3 mm Allen wrench loosen up the set screw at the
bottom of the throttle.
Reverse the steps to install.
ATTENTION: Charge battery 12 hours before using.
