Razor Trikke E2 Скачать руководство пользователя страница 10

Страница: 10 / 15

Need Help?

Visit our website for replacement parts, product support and a list of authorized service centers

www.razor.com

or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the

product I.D. code (located on the white label on your product or back of charger) available for better assistance.

Rear Wheel Replacement

Tools Required:

Two (2) 5mm Allen wrenches

Using two (2) 5mm Allen wrenches, loosen axle bolt and remove wheel.

Install new wheel, re-insert axle bolt and tighten securely.

REPAIR AND MAINTENANCE

Adjusting the Brakes

Tools Required:

8mm wrench

Using an 8mm wrench,

loosen nut on brake line (by

caliper clamp) and adjust tension.

If brake still needs further

adjustment proceed to step 3.

Using a 8mm wrench, loosen

up the barrel adjustor that is

holding the brake cable and

adjust tension accordingly.

To adjust the brake cable

tension, thread the brake lever

adjuster in or out 1/4 to 1/2 turn

until the desired brake adjustment

is attained. Most adjustments

are complete at this step. If brake

needs further adjustment, proceed

to step 2.

Turn power switch “OFF” before beginning repair or maintenance:

• Read the instructions

• Remove Charger Plug

• Turn the power switch off

• Secure the unit under repair

• Exercise caution around

exposed parts

• Contact Razor customer service

if unsure about any repair or

maintenance

Содержание Trikke E2
















Результаты поиска

Содержание Trikke E2

Отзывы:

Похожие инструкции для Trikke E2

Бренды по названию

Популярные бренды

Razor Trikke E2, Руководство пользователя

Результаты поиска

Содержание Trikke E2

Отзывы:

Похожие инструкции для Trikke E2

Бренды по названию

Популярные бренды