2
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Direct parental supervision is required at all times. Electric products are
meant to be used only in controlled environments, free of potential traffic
hazards and not on public streets. Do not allow your child to ride an electric
product in any areas where vehicle traffic is present. Never use near steps,
sloped driveways, hills, roadways, alleys or swimming pool areas.
Do not activate the speed control pedal unless child is on the Mini Mod and in
a safe, outdoor environment suitable for riding.
The normal powered top speed of the Mini Mod will be approximately 2 mph
(3 kmh), which can be affected by conditions, such as rider weight, inclines,
and battery charge level. Avoid excessive speeds that can be associated with
downhill rides. Ride on level and flat ground only.
Maintain a hold on the handlebars at all times.
Ride defensively. Watch out for potential obstacles that could catch the wheel
or cause the rider to swerve suddenly or lose control. Be careful to avoid
pedestrians, skaters, skateboards, electric products, bikes, children or animals
who may enter your path, and respect the rights and property of others.
Wet, slick, bumpy, uneven or rough surfaces may impair traction and
contribute to possible accidents.
Child must maintain a hold on the handlebars at all times. Never allow more
than one child at a time to ride electric product.
Do not allow hands, feet, hair, body parts, clothing, or similar articles to
come in contact with moving parts or wheels while the motor is running.
Do not ride your Mini Mod in wet or icy weather and never immerse the Mini
Mod in water, as the electrical and drive components could be damaged
by water or create other possibly unsafe conditions. Never risk damaging
surfaces, such as carpet or flooring, by use of the Mini Mod indoors.
PROPER RIDING ATTIRE
Always ensure child is wearing proper protective equipment, such as an
approved safety helmet. A helmet may be legally required by local law or
regulation in your area. A long-sleeved shirt, long pants, and gloves are
recommended. Always wear athletic shoes (lace-up shoes with rubber soles)
and keep shoelaces tied and out of the way of the wheels and motor. Knee
pads and elbow pads are recommended.
SAFETY WARNINGS
USING THE CHARGER
The charger supplied with the Mini Mod should be regularly examined for
damage to the cord, plug, enclosure and other parts. In the event of such
damage, the Mini Mod must not be charged until the charger has been
repaired or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from Mini Mod when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
Mini Mod with damp cloth.
WARNING:
ALWAYS INSPECT ELECTRIC PRODUCT PRIOR TO
RIDING. Properly inspecting and maintaining your electric product can reduce
the risk of injury. Always inspect your electric product before riding and
regularly maintain it. Replace worn parts when they occur.
WARNING:
CHECK LOCAL LAWS REGARDING ELECTRIC PRODUCT
USE. Check local laws and regulations to see where and how you may
use your electric product legally. In many states and local areas electric
product riders are required BY LAW to wear a helmet. Check local laws
and regulations regarding laws governing helmet use and electric product
operation in your area.
FAILURE TO USE COMMON SENSE AND HEED THE WARNINGS
INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK.
USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO
SAFE OPERATION.
Содержание MINI MOD
Страница 10: ...9...