5
HEADLINE
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
PRE-RIDE CHECKLIST
USAGE
5
Loose Parts
Check and secure all fasteners before every ride. Make sure
the steering bolts and foot platforms are tight. There should
not be any unusual rattles or sounds from loose parts or
broken components. If you are not sure, call 1-866-467-2967
for assistance.
Replacement Parts
Replace worn or broken parts immediately.
Call 1-866-467-2967 for parts or visit www.razor.com.
Brake
Check the brake for proper function. When you squeeze the
brake lever, the brake should provide positive braking action.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or wall and wreck, bend or break a frame. Get in the habit of
inspecting yours regularly.
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear shoes
(lace-up with rubber soles) and keep shoelaces tied and out of
the way of the wheels. Never ride barefooted or in sandals.
How to Ride
Place both hands on the handlebars. Place one foot on the platform directly above the caster. Push off with the other
foot then place foot on the other platform directly above the caster. Slightly bend knees. With handlebars straight,
swing hips and legs side to side. Shifting weight on the platforms from right to left in sync with hips and legs. The
side to side motion acts to self propel the PowerWing Lightshow. No pushing required.
How to Operate Lights
1. There is no power switch to active the lights on the deck or wheels.
2. The deck lights are activated by a vibration sensor.
3. Deck and wheel lights are activated when PowerWing Lightshow is in motion.
4. Deck lights will remain on for approximately 20 seconds after PowerWing Lightshow has stopped moving. Lights
are re-activated when PowerWing Lightshow resumes motion.
5. The PowerWing Lightshow has five (5) light modes. Press the button
(A)
at the front left side of the deck and the
light will be switched to the next mode.
How to Stop
Apply hand brake by squeezing brake lever.
Note:
Do not step off of
platforms until unit has come to
a complete stop.
A
