A
B
C
D
D
C
21
Now move the serrated belt slides and 2” straight D Rings until they are
positioned just behind the hipbone on each side of the waist strap webbing.
Make sure that both D Rings are positioned evenly and far enough back that
the bottom of the Side-Mount Tanks will not hang down below the body when
trimmed out in a horizontal position.
Weights can be added to the Waist Strap between the DAPs and the Hip D
ring if required but it is recommended to use the T Weight System rather
than add weight directly to the Razor Harness itself (see Step 9: Weighting
and Trim).
Hardware on both sides of the waist straps will have to be removed in order
to do this.
Extra attachment hardware such as a second D ring on each side can be
added at this point if required.
2 Rigging the Razor Harness 2
Step 6: Fixing Attachment Hardware on the Waist Straps
