Razor Ground Force, Руководство пользователя, Страница: 5 / 16

3
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the Ground Force was 95 percent assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 45 minutes for assembly, not including initial charge time.
Allow up to 12 hours for charge (see page 5 for charging information).
Brake Lever
Wheel
Speed Control / Thumb Throttle
Steering Wheel
1.
2.
3.
Brake Adjustment
(Auxiliary)
Tie Rod
Charger Port
On/Off
Switch
WARNING:
DO NOT USE NON-RAZOR PARTS
WITH YOUR GROUND FORCE.
The Ground Force has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on the
basis of its compatibility with the
frame and all other parts. Certain
aftermarket components may not be
compatible. Use of non-Razor parts
will void the warranty.
Product ID Locations:
(See locations to the left)
1. Charger
2. Underneath Product
3. Battery Box
4. Box (not shown)
Required Tool
5 mm Allen Wrench
(Included)
Plastic Bag Contents:
• Charger
• Tool
• Owner’s Manual
Charger
(Note: Charger design may vary from
one shown)