Razor FLASHBACK Скачать руководство пользователя страница 10

REPAIR AND MAINTENANCE

8

A

A

B

B

 Cleaning Your Scooter

Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the 

surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic 

components or soften the decals or decal adhesive.

 Wheels and Bearings

It is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axles for 

proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops 

play, this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine 

Razor replacement wheels. Worn wheels/bearings are considered normal wear and tear and are not covered by the 

Warranty. Other manufacturers’ wheels may not be compatible with your Flashback scooter, may affect your safety 

and will void your warranty.

 Replacement Parts

The most frequently requested replacement parts are available for purchase at some Razor retail partners. 

For the complete selection of replacement parts visit www.razor.com.

 Repair Centers

For a list of authorized Razor repair centers: 

• Check online at www.razor.com.

• Additional Customer Service contact information is listed at the back of this manual.

 Replacing the Rear Wheel

Required Tools:

 10 mm Wrench and Two (2) 16 mm Wrenches (included)

1

 Loosen the brake clamp nut with 

a 10 mm wrench.

4

 Tighten the axle nuts using 

two (2) 16 mm wrenches.

2

 Remove axle nuts from the 

axle bolt using two (2) 16 mm 

wrenches and remove the wheel.

5

 Press both sides of the brake 

clamp inward until it is close to the 

wheel hub. Keep both sides of the 

clamp motionless while pulling the 

brake cable back. Tighten the nut 

with a 10 mm wrench.

3

 Insert the replacement wheel 

into the rear fork and insert the tab 

on the washers 

(A)

 into the holes 

(B) 

on the rear fork. Safety washers 

should be on the outside of the fork 

facing the tire.

WARNING:

 Failure to 

properly install the rear wheel may 

cause the rider to lose control and 

fall. If you are having difficulty 

understanding these instructions, 

please contact Razor Customer 

Service for assistance.

Содержание FLASHBACK













Отзывы: