WARNING:
If a battery
leak develops, avoid contact with
the leaking acid and place the
damaged battery in a plastic bag.
Refer to the disposal instructions at
left. If acid comes into contact with
skin or eyes, flush with cool water
for at least 15 minutes and contact
a physician.
WARNING:
Battery
posts, terminals and related
accessories contain lead and lead
compounds.
Wash your hands
after handling.
REPAIR AND MAINTENANCE
6
q
Battery Care and Disposal
Do not store in freezing or below freezing temperatures.
CONTAINS SEALED LEAD ACID BATTERIES. BATTERIES MUST BE RECYCLED.
Disposal:
Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally safe manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. Do not
dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed lead-
acid batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state
approved lead-acid battery recycler or a local seller of automotive batteries. If you live in Florida or Minnesota, it is
prohibited by law to throw away lead-acid batteries in the municipal waste stream.
q
Charger
The charger supplied with the EcoSmart Metro electric scooter should be regularly examined for damage to the cord,
plug, enclosure and other parts and in the event of such damage, the product must not be charged until it has been
repaired or replaced.
Use ONLY with the recommended charger.
q
Wheels
Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect
wheels for excess wear and adjust and replace drive train components as required.
q
Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the
complete selection of replacement parts visit www.razor.com/shop.
q
Authorized Service Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Call 866-467-2967 for a list of Authorized Service Centers near you.
q
Checking Spoke Tension
WARNING:
Regularly check the spoke
tension and retighten the
spokes whenever loose. If
you have any doubt, ask an
experienced motorcycle or
bicycle mechanic to inspect
your spokes to determine if
the spokes need tightening or
adjusting.
1
Verify spoke tension by grasping and shaking each spoke. Spoke should
not be loose from hub. Look for any play between spoke flanges where it
mates with hub. Try to turn nipple using your fingers. You should not be
able to spin any nipple by hand. If one or more spokes are loose, or if you
can turn any nipple using your fingers, all spokes must be checked and
need to be tightened.
Spoke
Flange
Spoke
Nipple
Hub
Flange
Spoke
Flange
Rim
Nipple
