background image

8

Need Help?

 Visit our web site for updates and a list of authorized service centers at 

www.razor.com

 or 

call toll-free at 

866-467-2967

 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

 TROUBLESHOOTING GUIDE

Sometimes the scooter 

doesn’t run, but other 

times it does

Charger gets warm 

during use

Scooter does not stop 

when applying the brake 

Scooter makes loud 

noises or grinding 

sounds

Problem 

      Possible Cause 

Solution

Loose wires or connectors

Motor or electrical switch damage

Normal response to charger use

Brake not adjusted properly

Chain is too dry

 

Brake rotor is dragging on brake pads 

Check all wires around the motors and all connectors to make sure 

they are tight.

Contact your local Razor authorized service center for diagnosis and 

repair.

No action required. This is normal for some chargers and is no cause 

for concern. If your charger does not get warm during use, it does not 

mean that it is not working properly.

Refer to adjusting the brake instructions on page 4 .

 

 

Apply a lubricant such as 3 in 1

TM

 or Tri-Flow

TM

 to the chain.

Use your fingers to twist the caliper adjuster in either direction until 

rotor is centered between pads.

Содержание E500S













Отзывы: