Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Step 3
Step 4
Step 5
Step 6
Install the new control module using the same two (2)
screws previously removed. Reconnect the six (6) white
plastic connectors.
Using a 4 mm Allen wrench, loosen the two (2) screws
(1 on each side) holding the control module in place and
remove the control module.
Carefully cut the zip ties holding the wires together.
Disconnect the six (6) white plastic connectors attached to
the control module by depressing the tab.
Using a Phillips screwdriver, remove the four (4) screws
that hold the the battery cover to the frame. Locations of
the screws are circled in the image below. Then using a
4 mm Allen wrench, remove the two (2) hex bolts on top
of the battery cover. Set battery cover aside.
Hex bolts
