MX350 DIRT ROCKET™
THROTTLE INSTALLATION INSTRUCTIONS
Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
1
CAUTION:
To avoid potential shock or other injury, turn power switch OFF and discon-
nect charger before attempting these procedures. Failure to follow these steps in the correct
order may cause irreparable damage.
Figure 1
Figure 2
Step 1
Remove the two hex bolts under the seat using a
5mm Allen wrench and hold the nuts in the back
using a 10mm open wrench
Slide the fairing towards the back of the bike
and remove.
Step 2
Tools Required:
(
Not included
)
A. Phillips head screwdriver
B. 2.5mm Allen wrench
C. 5mm Allen wrench
D. 10mm open wrench
F. Flat head screwdriver
