Sometimes the motor
bike doesn’t run, but
other times it does
Charger gets warm
during use
Motor bike does not
stop when applying the
brake
Motor bike makes
loud noises or grinding
sounds
problem
possible cause
solution
Loose wires or connectors
Motor or electrical switch damage
Normal response to charger use
Brakes are not adjusted properly
Chain is too dry
Check all wires around the motors and all connectors to make sure
they are tight.
Contact your local Razor authorized service center for diagnosis and
repair.
No action required. This is normal for some chargers and is no cause
for concern. If your charger does not get warm during use, it does not
mean that it is not working properly.
Refer to instructions on page 5 of this manual to properly adjust brakes.
Apply a lubricant such as 3 in 1
TM
or Tri-Flow
TM
to the chain.
TrOuBlesHOOTIng guIDe
