DIRECTION OF TRAVEL
Safety
Button
4
Need Help?
Visit our website for replacement parts and product support at
www.razor.com
or call toll-free at
866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the
bottom of the frame) available for better assistance.
ImPORTANT:
Always select
a riding area that is level, smooth,
dry, and completely free of traffic or
obstacles.
Riding Tip:
Learning when to
push and when to let off of the
accelerator pedal will improve your
ability to do spins, drifts, and tricks
smoothly.
Before you ride this exciting new product, take the time to learn about how it moves the way it moves. Familiarize
yourself with these riding hints and tips so that your experiences with the Crazy Cart and allow you to maximize fun
while keeping in control.
Notice:
This product is equipped with a safety button that will not allow the
accelerator pedal to engage until the button is depressed, even if the power
switch is “on”. Make sure rider is safely seated with safety belt in place prior
to depressing safety button.
After riding, but before exiting the cart, press to release the button and
re-engage safety feature.
Note:
Turning the power switch “off” will not
re-engage the safety button.
Four Important Control Features:
Accelerator Pedal, Steering Wheel, Drift Bar System, “Turn-Away” Stopping
The Crazy Cart allows really creative drifting, spinning and turning that no ordinary go-kart can do. If you have ridden
a Razor RipStik
®
or a Razor RipRider 360
®
, think about those caster wheels and how they allow rapid changes of
direction; or how a Razor Ground Force
®
Drifter
™
go-kart allows full speed rear-end drifting. The Crazy Cart builds on
these motions and adds even tighter turning possibilities through the fully rotational center motor and an adjustable
angling ability for the rear caster wheels. Practice with these Crazy Cart characteristics can lead to amazing fun, and
the importance of exercising caution and common sense when riding is – as with all moving products – important for
every rider.
Accelerator Pedal
The Crazy Cart has a foot pedal accelerator that controls the cart’s speed. This variable speed accelerator allows
you to drive the cart at a range of speeds from 0-12 MPH, depending on how much it is depressed. This ability to
dynamically speed up and slow down is the key to controlled drifting.
Steering Wheel
The Crazy Cart’s steering wheel is different from a normal car or cart in a number of ways. The most important thing to
remember about the Crazy Cart’s steering wheel is that the arrow on it points in the direction where the cart is going
to travel, regardless of how the rest of the cart is oriented. Simply point the arrow where you want the cart to go
(using the drift bar can change how the back of the Crazy Cart follows, as described below).
The Crazy Cart’s steering wheel is able to rotate more than 180° in each direction. The steering wheel has a “hard
stop” when it has reached the limit of its turning – it won’t keep going around all the way, but by turning fully one
direction or fully the other direction, you can ride the Crazy Cart backwards - and by turning at or near 90° the Crazy
Cart can go in a very, very tight circle (be careful to avoid losing control by turning so much as to risk becoming dizzy).
The steering configuration of the Crazy Cart’s integrated drive and steering mechanism is reminiscent of what some
might call “shopping cart” design. It has no self-correcting camber or castering features (meaning the steering
tube goes straight up and down so the wheel doesn’t “align” itself on its own). Such steering might, in certain
circumstances, shimmy or vibrate a little -- this is normal. Usually it is the result of an uncoordinated or adverse
control condition. If you feel a shimmy in the steering, a change of direction and/or speed change helps reestablish
smooth control.
HOW TO OPERATE THE CRAZY CART
