Razor Bistro 15130640, Руководство пользователя

Страница: 7 / 14

6
q
Battery Care and Disposal
Do not store the battery in temperatures above 75° or below -10° F.
CONTAINS SEALED LEAD BATTERY. BATTERY MUST BE RECYCLED.
Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally sound manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. Do not
dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed lead-
acid batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state
approved lead-acid battery recycler or a local seller of automotive batteries. If you live in Florida or Minnesota, it is
prohibited by law to throw away lead-acid batteries in the municipal waste stream.
q
Charger
The transformer/charger supplied with the Pocket Mod should be regularly examined for damage to the cord, plug,
enclosure and other parts, and, in the event of such damage, the bike must not be charged until it has been repaired or
replaced.
Use ONLY with the recommended charger.
q
Replacement Parts
The most frequently requested replacement parts (wheels, tires, tubes, batteries and chargers) are available for
purchase at some Razor retail partners or online at www.razorama.com. For other parts contact an authorized Razor
repair center.
q
Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Send e-mail to customerservice@razorusa.com or call 866-467-2967 for the center nearest you.
WARNING: If a battery
leak develops, avoid contact with
the leaking acid and place the
damaged battery in a plastic bag.
Refer to the disposal instructions at
left. If acid comes into contact with
skin or eyes, flush with cool water
for at least 15 minutes and contact
a physician.
REPAIR AND MAINTENANCE
q
Replacing the Fuse
1
Remove the fairing/body
cover.
2
Locate the fuse cover
attached to the batteries.
3
Open the fuse cover to
expose the fuse.
4
Remove the fuse and replace
with a new one of equal
amperage.
Note:
Amperage is located
on top of fuse and should be
replaced with equal amperage.
5
Close the fuse cover and
reattach the fairing/body cover.
Amperage
number