Accessories
Razaire 530
™
8” Front Hood (replacement)
# ZA550-8
Customize your Razaire™ 530 to meet your needs! All accessories attach in seconds without any tools. It’s easy to
change from a table-top unit to a lap-top collector or even a 4” vacuum.
4” Inlet hose adapter
Connect your
Razaire™ 530 to many of your shop tools,
to a lap-top carving tray, or even a cyclone
lid. You can even use your Razaire™ 530
as a variable-suction vacuum cleaner
using 4” vent hose from your local
hardware store.
# ZA400
Motor Tool Hanger
Hang your
flex-shaft tool on the Razaire™
530. Can be mounted on either
side (unless the Exhaust Air
Deflector is in place).
# ZA325
Exhaust Air Deflector
Exhaust air normally discharges from the side of the Razaire™ 530. This
adapter slips down over the exhaust, re-directing the air towards the back of the unit. Useful in
classes, but it’s also great to re-direct air in many other situations such as when using your Razaire™
530 beside a tabletop sander or scrollsaw. It’s also recommended that you use this deflector when
using a Razaire™ 530 without the front hood.
# ZA375
Current pricing available at www.razertip.com
Lap-top tray
This very comfortable tray lets you carve right in your lap (requires use of
the 4” hose adapter and a length of 4” hose). But it’s much more than just a lap tray.
Stand it on edge and it excels at picking up dust from small stationary belt sanders and
small grinders. The upper edges are not only comfortable to rest your arms on, they can
also be used to fashion the lap tray into a drawer that conveniently stores away under your
desk or bench. Approximately 13”x17”x2” deep.
# ZA440
Razertip Index
Adapters
5
Cords
5
Dust collector and accessories
31,32
General information
7
Grips, foam handpiece
6
I.D. Rings
6
Interchangeable-tip pen
9
Pen comparison
9,10
Power Supplies -120V
2
Power Supplies -240V
3
Starter Packages
4
Tip cleaner
6
Tip replacement service
7
Tip Index See Below
Tip wire
23
Warranty information
7,8
Tip Index (By Tip Type)
Ball Stylus Tips
20,21
Bead-making Tips
16
Branding (Stamping) Tips
22
Burninshing Tips
16
Calligraphy Tips
20
Cutting Tips
16
Detail (sharp) Tips
10-13
Feather Former™ Tips
28-30
General-purpose Tips
22
Lamilae-making Tips
16
Long-reach Pens
12
Modifiable Tip Blanks
23
Multi-line Tips
13
Multi-use Tips
15
Quill-making(Shaft-making) Tips
17,18
Scale Tips
24-26
Sets
15,16,27,28-30
Shading Tips
18,19
Shaft-making Tips
17,18
Sharp-line (detail) tips
10-14
Special-purpose Tips
16
Split-making Tips
15
Stamping Tips
22
Steel Blank Tips
23
Tip Sets
15,16,27,28-30
Tip Wire
23
Transfer Tips
19
“V” Branding Tips
22
Wax Tips
21
Wide Detail Tips
14
Wire Blanks (make your own tips)
23
Writing and Stylus Tips
20,21
Tip Index (By Series #)
Series 1 Skew Tip
10
Series 2 Round Tips
11,18
Series 3 Lamilae Making Tip
16
Series 4 Flat Skew Tips
11
Series 5 Spear Tips
12,14,17,18
Series 6 Chisel Tips
13,19,20
Series 7 Round Skew Tips
11
Series 8 Burnishing Tips
16
Series 9 Writing Tips
20
Series 10 General Purpose Tips
22
Series 11 Multi-Line Tips
13
Series 12 Curverd Spear Tips
12
Series 13 Sharp Skew Tips
11
Series 14 Knife Tips
13
Series 15 Shaft/ Shading Tips
17,18
Series 16 45-Degree Shaders
19
Series 17 Coarse Detail Tips
14
Series 18 Multi-use Tips
15
Series 20-29 Scale Tips
24-26
Series 30 Spoon Shading Tips
19
Series 32 Waxing Tips
21
Series 34 Simkin Split-makers
15
Series 35 Mueller Split-makers
15
Series 36 Larry Barth Tips
14
Series 52-57 Feather Formers
28-30
Series 92 Circle Stamping Tips
22
Series 66 “V” Branding Tips
22
Series 68 Brass Calligraphy Tips
20
Series 70-78 Steel Blank Tips
23
Series 71 Wide-groove Detail
14
Series 73 Transfer/Shader Tips
19
Series 79 Wax Writiing Tips
21
Series 92 Circle Stamping Tips
22
Series 93 Copper Shading Tip
16,19
Series 96 Square Stamping Tips
22
Series 98 Bead-making Tips
16
Series 99 Ball-stylus Tips
20,21
Series “PK” Waxing Tips
21
Razertip #21a 2017. Toll-free Canada & USA 1-877-729-3787
www.razertip.com
31
