Network Setup
- p2
Introduction
Thank you for purchasing our RVH series DVR.
Welcome to this step by step network set up guide for our
ICatch/Rayvision
DVRs,
US411/RVH1004, US811/RVH1008, and
US611/RVH1016
.
Following this guide you should be able to connect your
DVR to the Internet, and then you can view your DVR anytime
anywhere on any computer.
STEP-1 Activate DDNS Service.
All of our RVH series DVRs provide free Full DDNS service, allowing
you to connect your system to the Internet, even if you don’t have
Static IP address.
A.
Every DVR comes with a software CD like the one shown
below.
You can also find the user manual to the DVR inside this CD quick
start guide and central management software.
On the CD there is a sticker with the username and password.
Each DVR is unique, so do not use the same username or password
you’ve already used before.
B.
To start visit the following website to activate your Free DDNS
service using the provided user name and password on the CD
sticker :
http://i-dvr.net/logon.asp
