V1.1
Shanghai Empower Technologies Co., Ltd. © Copy Right
www.empower.cn
BM114 SERIES 6KW Laser Cutting Head User Manual
17 | 11
3.3.3
Interface Operation
1. Close to upper limit. Inch J axis after ensure there’s no warning and detect whether the action is
normal(distance to “pitch” and direction), 0 scale moving upward is J+
2. Slow moving J axis so that it touches the positive and negative limit, detect whether the signal and
direction is right.(The positive and negative limit wiring has the pipe sleeve mark)
3. Click zero returning icon, J axis move to negative direction and turn to zero again after touching the
negative limit. At the moment zero point position coincides with zero focus position, the zero returning is
finished.
Figure 4.8— Platform configuration tools
Figure 4.9— Operation interface
