Raytherm WH-0133, Инструкция по установке и эксплуатации

Страница: 8 / 52

8
Heater
Model
Number
Floor Base
Part
Number
0133 001749
0182/ 0181 058313
0260/ 0261 058314
0330/ 0331 058315
0400/ 0401 058316
0514 056199
0624 056200
0724 056201
0824 056202
0926* 054597
1083* 054598
1178* 054599
1287* 054600
1414* 054601
1571* 058378
1758* 058379
0962 059233
1125 059234
1223 059235
1336 059236
1468 059237
1631 059238
1826 059239
*Models with factory installed floor
shield as standard.
BOLD TYPE indicates Low NOx models.
Table B: Combustible Floorshield Ordering Information
Fig. 2: Alternate Method for Providing a Non-
Combustible Base
Clearances
Installation Clearances
(All Dimensions are in Inches)
0133 0181 to 0514 to 0926 to 2100 to
Location 0401 0824 1826 4001
Floor
Front
Back 12 12 12 24 24
Right 6 12 6 24 24
Left 12 12 18 24 24
*Vent 6 6 6 6 6
Indoor Top 42 39 36 24 24
Outdoor Top NA
See Note 1
See Note 2
Unobstructed
Heater Size
Table C: Clearances From Combustible Surfaces
Note 1: Combustible floor shield is required when heater is to be
installed on a combustible surface. (See ordering info.)
Note 2: Servicing Clearances: Provide at least 24" (Models 0133-
1826), 48" (Models 2100-4001) in front of unit for removal &
servicing of the Controls & Burner Tray. Provide at least 18" on side
opposite water connections for deliming of Heat Exchanger Tubes.
*Vent includes factory supplied drafthoods and does not include field
supplied vent systems above the drafthood. On Models 2100-4001
drafthood is built into heater.
Heater Size
0133 0181 to 0514 to 0926 to 2100 to
Description Location 0401 0824 1826 4001
a . 3-1/2 in. thick masonry walls Back 9 9 9 16 16
without ventilated air space. Right 5 9 5 16 16
Left 9 9 12 16 16
Vent 5 5 5 5 5
Indoor Top 43 39 36 24 24
Outdoor Top Unobstructed NA
b . 1/2 in. insulation board Back 6 6 6 12 12
over 1 in. glass fiber or Right 3 6 3 12 12
mineral wool batts. Left 6 6 9 12 12
Vent 3 3 3 3 3
Indoor Top 30 30 24 16 16
Outdoor Top Unobstructed NA
c . 0.024 sheet metal over 1 in. Back 4 4 4 8 8
glass fiber or mineral wool Right 3 4 3 8 8
batts reinforced with wire Left 4 4 6 8 8
on rear face with ventilated Vent 3 3 3 3 3
air space. Indoor Top 24 24 18 12 12
Outdoor Top Unobstructed NA
d. 3-1/2 in. thick masonry wall Back 6 6 6 8 8
with ventilated air space. Right 6 6 6 8 8
Left 6 6 6 8 8
Vent 6 6 6 6 6
Indoor Top 42 39 36 24 24
Outdoor Top NA Unobstructed NA
e . 0.024 sheet metal with Back 4 4 4 8 8
ventilated air space. Right 2 4 2 8 8
Left 4 4 6 8 8
Vent 2 2 2 2 2
Indoor Top 24 24 18 12 12
Outdoor Top Unobstructed NA
f. 1/2 in. thick insulation Back 4 4 4 8 8
board with ventilated Right 3 4 3 8 8
air space. Left 4 4 6 8 8
Vent 3 3 3 3 3
Indoor Top 24 24 18 12 12
Outdoor Top NA Unobstructed NA
g. 0.024 sheet metal with Back 4 4 4 8 8
ventilated air space over Right 3 4 3 8 8
0.024 sheet metal with Left 4 4 6 8 8
ventilated air space. Vent 3 3 3 3 3
Indoor Top 24 24 18 12 12
Outdoor Top Unobstructed NA
h. 1 in. glass fiber or mineral Back 4 4 4 8 8
wool batts sandwiched Right 3 4 3 8 8
between two sheets 0.024 Left 4 4 6 8 8
sheet metal with ventilated Vent 3 3 3 3 3
air space. Indoor Top 24 24 18 12 12
Outdoor Top NA Unobstructed NA
Table D: Clearances to Protected Surfaces