Raytheon Beechraft Starship 2000, Руководство по обслуживанию

Страница: 378 / 1062

21-30-00
STARSHIP 1 MAINTENANCE MANUAL
Page 18
Oct 31/06
B10
c. Connect the "B" solenoid wiring to the pressurization control module assembly according to tags or the
BEECHCRAFT Starship 1 Wiring Diagram Manual.
d. Refer to PRESSURIZATION CONTROL MODULE ASSEMBLY INSTALLATION in this chapter and install the
control module assembly.
e. Restore electrical power to the airplane.
"C" SOLENOID VALVE REMOVAL
CAUTION: When removing components, note the locations of all bonding jumpers to aid in installation.
a. Remove all electrical power from the airplane.
b. Refer to PRESSURIZATION CONTROL MODULE ASSEMBLY REMOVAL in this chapter and remove the
control module assembly.
CAUTION: When working around the control module assembly, extra care must be taken to ensure that no
pneumatic lines and connections, except those being disconnected, are loosened. A leak may develop
and prevent proper system operation.
c. Tag and disconnect the "C" solenoid wiring from the control module assembly.
d. Carefully disconnect the pneumatic line from the union in the inflow port of the "C" solenoid valve.
e. Carefully remove the "C" solenoid valve from the restrictor assembly. Remove and discard the packing from the
restrictor assembly.
f. Remove the union from the "C" solenoid valve. Remove and discard the packing from the union.
"C" SOLENOID VALVE INSTALLATION
CAUTION: The "C" solenoid valve must meet electrical bonding requirements specified in Chapter 20-00-03.
a. Install a new packing on the union and install the union in the inflow port of the "C" solenoid valve.
CAUTION: When working around the control module assembly, extra care must be taken to ensure that no
pneumatic lines or connections are accidentally loosened. A leak may develop and prevent proper
system operation.
b. Place an packing on the restrictor assembly and carefully install the "C" solenoid valve on the restrictor
assembly.
c. Carefully connect the pneumatic line to the union installed in the "C" solenoid valve.
d. Connect the "C" solenoid wiring to the control module assembly according to tags or the BEECHCRAFT
Starship 1 Wiring Diagram Manual.
e. Refer to PRESSURIZATION CONTROL MODULE ASSEMBLY INSTALLATION in this chapter and install the
control module assembly.
f. Restore electrical power to the airplane.