Operator manual
REPEATER
133--560
9
3649.DOC010102
Edition: July 06, 2005
2
Operating of the Repeater Compass Type 133 -- 560
2.1
Indications
2.1.1
Analog heading indication
The serial course information is converted into steps on the steering repeater PCB for the
stepping motor in the ratio of 1 : 36. It is indicated by the 360
°
and the 10
°
card.
2.1.2
Digital heading display
In addition to the analog heading indication by the cards, the Repeater Compass is also
equipped with a digital heading display on the left side of the front panel. This heading dis-
play cannot be desynchronized (refer to Fig. 2). The display alternates between the current
heading and the current heading sensor (”G_AL”, “G_M_”, “G_--_”, “M_--_”).
2.1.3
Status-- and alarm indications
The digital display also reports any possible error or alarm by means of a preset display
code (refer to section 4.2.2). If the Repeater Compass is used as a steering compass the
optical alarm is supported by a buzzer.
A LED on the right side of the front panel signalizes the status or alarm of the Repeater
Compass and of the telegram:
No.
LED
NMEA 0183 interface
Heading Serial interface
1
green
Repeater Compass is available
and the telegram is ok.
Gyro Compass is available
2
red
Repeater Compass is not
available (alarm indication),
the telegramm is defective
Gyro Compass is defective
3
yellow
Correction of the analog indication
(heading);
configuration of the Repeater
Compass
Settling phase of the gyro com-
pass
Содержание 133-560 Series
