Raytheon Anschütz 130-626, Руководство оператора и по обслуживанию

Страница: 61 / 104

Operator Unit 130-626.NG002
Standard 22 GYRO COMPASS
Edition: February 2020 2-19 4352.DOC010002
2.9.3.2 Assign DV-Bus Address
Assign a DV-Bus address if a DV-Bus is connected to the Distribution Unit.
CAUTION
After changes in the configuration of the DV-Bus service page the
operator units has to be reset.
The address of the distribution unit must only be assigned once in
the DV-Bus System.
An address between 1 and 15 is possible.
1. Open the sub-menu DV-Bus from the service page, see chapter 2.9.1.
- The sub-menu DV-Bus opens, see Figure 2-11.
2. Use the Set button (Figure 2-3/11) to navigate to “Address” (Figure 2-11/3).
3. Press the Select buttons (Figure 2-3/1 and 2) to change the address.
4. Use the Set button to set the value and leave the sub-menu.
1. Set the value: Select “Set the value” and press the Set button to confirm.
If values have been changed, the Operator Unit requires a restart.
2. Leave the sub-menu: Select “Back” and press the Set button to confirm.
To leave the DV-Bus sub-menu without any changes press the Page
button.