Installation
18
Rev. B 09/2011
Pi20
5.4
Geometry
The camera provides different lens models (factory installed) to accommodate a wide range of
applications. Each individual lens provides different thermal images (Field of View) and minimum
detectable spot sizes (Instantaneous Field of View). The optical diagram below shows the principal
graphical representation for measuring distance over the field of view.
Figure 6: Field of View for the Camera
It is important that the camera is mounted at a distance from the target sufficient to be able to “see”
the entire area of interest. For this reason, the manufacturer provides a software tool (on the support
CD or downloadable from the website) calculating the Field of View for a given lens based on a
specific camera mounting distance.
Minimum detectable spot size
(Instantaneous
Field of View)
Thermal Image
(Field of View)
()
Содержание ThermoView Pi20
Страница 1: ...ThermoViewTM Pi20 Fixed Thermal Imager Operating Instructions Rev B 09 2011 55301...
Страница 41: ...Accessories Pi20 Rev B 09 2011 41 Figure 18 Digital Input Wiring Figure 19 Relay Output Wiring...
Страница 43: ...Accessories Pi20 Rev B 09 2011 43 Figure 20 Analog Output Wiring Figure 21 Digital Output Wiring...
