RESULH4-L1-W
User Manual
Manual-
RESULH4 -Rev1407.pdf
Page 6 of 10
www.rayteccctv.com
Copyright © Raytec Systems Inc
1.5 Instruction of Disassembly
Instruction of Disassembly of Raytec Product
(For EU Directive 2002/95/EEC
━
WEEE)
Tools Required:
1)
5 mm flat tip screwdriver
2)
Φ
3 cross tip screwdriver
3)
Φ
5 cross tip screwdriver
4)
Size small snip nose pliers
5)
15 mm spanner
Steps for Disassembly:
1) Remove tightening screws of box cover (1 or 4-8 screws in general);
2) Remove lock nut for BNC with spanner;
3) Remove cover plate;
4) Remove tightening screws for printed circuit board (PCB);
5) In case the assembly has more than one PCB then continue removing the remain
tightening screws until none left;
6)
Use snip nose pliers to loose the nut of flange and then remove optic cable
connector
(jump wire);
7)
Snip off power conducting cable and remove power switch /jack/etc.;
8)
Take out all PCBs;
9)
Disassembly of product completed.
Notice
：
When a product reaches the end of it’s life—return to Raytec
