www.rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
3
PULSESTAR is factory set and delivered with a 35° x 10° Beam Angle interchangeable lenses
(ILS) are also supplied.
To alter to 10° x 10°, simply remove interchangeable lens (ILS).
To alter to 20° x 10°, replace with other ILS lens supplied.
Other angle ILS lenses are available to order, please contact Raytec.
All ILS lenses will be clearly marked with the angle which they will produce when inserted into
PULSESTAR.
Please handle ILS lenses with care - and do not touch the optical film.
Only 1 ILS lens can be inserted into the product at anytime. The product cannot accommodate
multiple ILS lenses at the same time.
We would recommend that power is turned off when replacing ILS lenses.
IMPORTANT NOTE:
Ensure base plater is securely located, the gasket is correctly located and
the screws correctly fastened to ensure and maintain IP66 rating of the product.
Inter-Changeable Lens System
Wiring:
1. Mount Illuminator
2. Connect Illuminator to low voltage input 12-24V AC/DC
IMPORTANT: For Vario 16 variants : 24V only AC/DC
3. Complete configuration, wiring and final set-up using manual push buttons on
the illuminator or VARIO Remote Controller (VRC) - VRC is an optional
accessory
Black Wire = Negative (-ve)
Red Wire = Positive (+ve)
White & Yellow wires = Photocell following contact, Volt free output, Non polarity
sensitive
Orange and Purple Wires = Telemetry input Volt free / dry contact or TTL input
Lens Selection:
VARIO is factory set and delivered with a 35˚ beam width angle.
To alter to 10˚, simply remove interchangeable lens (ILS).
To alter to 60˚, replace with other ILS lens supplied.
Other angle ILS lenses are available to order: 80˚ and 120˚.
Please handle ILS lenses with care – and do not touch optical film.
Use 2.5mm Allen/hex key. Re-attach base plate securely ensuring gasket is correctly
located.
Important Note : Ensure base plate is securely located, the gasket is
correctly located and the screws correctly fastened to ensure and
maintain IP66 rating of the product
