- Version.
Select
Disable, Version 1
or
Version 2
to control this trap host.
- IP Address.
Enter the Trap Host IP Address.
- Community
. Enter the password in this field.
3.
Click
OK
. To refresh the current trap host pool.
4.
To modify another trap host entry to the current trap host pool, repeat
step 1 through step 3.
5.
When you have modified all the entries you need, click
FINISH .
Figure 4-10 Modify SNMP Trap Host Parameter
4.7
Configure Wireless related parameters
Click
General Cofig, Wireless
.
The Wireless LAN information page
Figure 4-11
appears. In here, enter the
Transmit Power
(default is
20dB
)
,
Channel
(default is
1
)
,
Domain(
default is Europe
)
,
rts Threshold
(default
is
1600
)
,
frag Threshold
(default is
1600
)
,
SSID
(default is
wireless
) and
Station Name
(default is
ap
) that are suitable for your radio network and
then you can clicked radio button to disable WEP or enable 64/128 bit
WEP services
(default is
disable
), if WEP is enabled, you must input
corresponded
Default Key
index
and
WEP Key
and then click
KeyGen
to generate the WEP64 & WEP128 key patterns. After that, click
FINISH
at
the bottom of this page to complete the modification.
Figure 4-11
- Transmit Power.
This setting determines the transmit power which can
choice 8 to 23 dB
- Channel.
The factory setting is Radio Channel 1 transmitting at 2412
MHz. The channel set appears on the screen installed on your access.
Each channel covers 22 MHz. The bandwidth for channels 1, 6, and 11
