RayTalk RB-120, Руководство пользователя

Страница: 17 / 26

5. How to install and launch the SNMP Manager
There is a CD which enclosed in this product. The SNMP software can be found on this CD. Please
install the SNMP Manager on your pc and change the IP address of your pc into
192.168.5.xxx subnet
for RB-120 configuration. The default IP of RAYTALK RB-120 is 192.168.5.100.
To make sure your pc and
RB-120 whether in a same subnet and the connection is well, you can do
a test via “ping” command. For example, you can employ the following command “ping 192.168.5.100”
to check this connection is ok or not.
After launched the SNMP Manager, Please click the “Find Access Point”which under the “File” tab for
available AP searching. When find the available AP then press the “connect” button. Below is a figure
for a reference.
After completed the modified setting, please remember to save the result via click the “Download
Changes “which under the “File” tab.
Figure 1
User’s Guide 17