Copyright © RayTalk Industries. Tutti i diritti riservati.
28
3.5.5. Firmware Upgrade
Click
on
the
Upgrade Firmware
link under the
Management
menu. This page is
used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.
Click on the
Browse
button and then select the appropriate firmware and then click
on the
Upgrade
button.
Note
: The upgrade process may take about 1 minute to complete. Do not power off
the device during this process as it may crash the device and make it unusable. The
device will restart automatically once the upgrade is complete.
3.5.6. Time Settings
Click on the
Time Settings
link under the
Management
menu. This page allows you
to configure the time on the device. You may do this manually or by connecting to a
NTP server.
Manually Set Date and Time
: Specify the date and time
Automatically Get Date and Time
: Select the time zone from the drop down list and
then specify the IP address of the NTP server.
Click
on
the
Apply
button to save the changes.