4
Function and operation
Icon Function
and
operation
Press this button to shoot laser beam
(1) Click this button to go to previous slide
(2) Press and hold over 1 second to start continued slide up at speed about 2~3 slides per second.
Release your finger to stop slide up
(1) Click to start the slide show from the 1
st
page
(2) Press and hold over 1 second to exit the slide show
(1) Click this button to go to next slide
(2) Press and hold over 1 second to start continued slide down at speed about 2~3 slides per
second. Release your finger to stop slide down
Press this button to shoot white LED light
Status
indicating
LED
(1) Light up when pressing the laser button
(2) Quick blink in 5 times after pressed any function key when battery power is detected low. Please
replace with new batteries soon for a stable control.
Note To avoid battery power consumption due to unintentional touch, any key function will be
automatically stopped after a continued pressing over 30 seconds!
ID Link
No need to conduct ID link process whenever you want to use this product,
UNLESS
battery power is normal and USB receiver is within connection distance
but the product cannot be operated
OR
when you want to use plural of this product
at the same time. Please conduct following 2 steps to shun interference
：
(1) Click the ID Link button on USB receiver and its red LED will light up and enter
into
20-second
ID link stand-by time.
Note
If pressing again the ID Link button
during 20-second stand-by time, ID link action will be discontinued.
(2) Within the 20-second stand-by time, press
and
simultaneously until the
red LED of USB receiver becomes blinking for 3 times, the ID link has been
successfully done.
