3
5-
Insert the pouch, sealed edge first, slowly into the Pouch/Document entry untill it engages
with the machine.
6-
The finished laminating item will automatically exit from the rear of machine.
TABLE OF PROGRAM SETTING
INFORMATION DISPLAY ON OPERATION PANEL
Program N
Pouch Thickness
Temperature
Code of Speed
Code of Mode
1
75mic
120
C
8
075
2
100mic
125
C
7
100
3
125mic
135
C
6
125
4
150mic
140
C
5
150
5
175mic
145
C
4
175
6
200mic
150
C
3
200
7
250mic
155
C
2
250
COL
Cold Laminating
50
C
7
COL
USE
User-defined
Manual adjustment
Manual adjustment
USE
Caution: The above information is only for reference. In order to get best effect of laminating, please
pre-test laminating effect by adjusting feeding speed.
HOW TO TURN OFF MACHINE:
1-
If the machine not going to be used any more, press Switch button (13) to stop running of
machine. The power indicator (22)
will be blinking for a few minutes. Please press Power
Switch (01) to “
OFF”
after power indicator (22) illuminating(stop blinking)
.
2-
Or if it has not been operated for 30 minutes, the machine will stop running automatically and
enter STANDBY status for 30 minutes. During standby, except Power Indicator (22)
blinking
, there’s no any information displayed on the operation panel. After entering into
STANDBY 30 minutes, machine will turned off. The power indicator (22) is illuminating(stop
blinking)
. (
NOTE:
If the machine needs to be re-started during standby, just press Switch
button (13) to activate it.)
Caution
: Wait at less 30 minutes before press Power Switch (01) to
