RAYSHAPE Edge E1, Руководство пользователя

Страница: 29 / 41

27
Post-processing
Cover the resin tank with lid if the resin material is
needed to be stored within the tank temporarily.
Shovel printed parts
Gently tap the blade with the hammer to remove the
model from the printing platform. Place the blade
as parallel as possible to the platform to avoid
scratching.
Please take resin material out of the tank if it
will be not consumed in 3 days, make sure to
get it filtered before store them in a light-proof
container. It was not recommended to mix it
with the original one directly.
Be sure to wear anti-cutting gloves, and the
blade of the shovel should be not orientated to
the body of the user during the operation.